Kazunori Kawaguchi, Akira Saigusa, Shinji Yamada, Takehiro Gotoh, Shigeru Nakai, Yoshiyuki Hiki, Midori Hasegawa, Yukio Yuzawa, Nobuya Kitaguchi
JOURNAL OF ARTIFICIAL ORGANS, 19(2) 149-158, Jun, 2016 Peer-reviewed
The accumulation of amyloid beta protein (A beta) in the brain reflects cognitive impairment in Alzheimer's disease. We hypothesized that the rapid removal of A beta from the blood by an extracorporeal system may act as a peripheral A beta sink from the brain. The present study aimed to determine the optimal materials and modality for A beta removal by hemodialyzers. In a batch analysis, hollow-fiber fragments of polysulfone (PSf) and polymethyl methacrylate (PMMA) showed greater removal efficiency of A beta than did other materials, such as cellulose-triacetates and ethylene-vinyl alcohol copolymer (PSf: PMMA at 30 min, 98.6 +/- 2.4 %: 97.8 +/- 0.4 % for A beta(1-40) and 96.6 +/- 0.3 %: 99.0 +/- 1.0 % for A beta(1-42)). In a modality study, the A beta solution was applied to PSf dialyzers and circulated in the dialysis and Air-filled adsorption-mode (i.e., the outer space of the hollow fibers was filled with air) or phosphate-buffered saline (PBS)-filled adsorption modes. The A beta(1-40) removal efficiency of the pre/post dialyzer in the Air-filled adsorption-mode was the highest (62.4 +/- 12.6 %, p = 0.007). In a flow rate study in the Air-filled adsorption-mode, 200 mL/min showed the highest A beta(1-40) reduction rate of pool solution (97.3 +/- 0.8 % at 15 min) compared with 20 mL/min (p = 0.00001) and 50 mL/min (p = 0.00382). PMMA dialyzers showed similar high reduction rates. Thus, the optimal modality for A beta removal was the adsorption-mode with PSf or PMMA hollow fibers at around 50 mL/min flow rate, which seems to be suitable for clinical use.