Faculty of Science and Technology

鈴木 匠

スズキ タクミ  (Takumi Suzuki)

基本情報

所属
成蹊大学 理工学部 理工学科 助教
学位
博士(工学)(2015年3月 東北大学)

J-GLOBAL ID
201801000076638541
researchmap会員ID
B000330019

論文

 16
  • Takumi Suzuki, Keita Sakuma, Junya Ohta, Yuki Ogimoto, Ko Takahashi, Toshinori Ozaki, Akira Ibi, Teruo Izumi, Tetsuya Yamaki, Hiroyuki Okazaki, Shunya Yamamoto, Hiroshi Koshikawa, Tatsunori Okada, Satoshi Awaji, Masashi Miura
    Japanese Journal of Applied Physics 63 060901 2024年4月30日  査読有り
    Abstract Given their excellent superconducting properties, REBa2Cu3Oy (REBCO)-coated conductors (CCs) are anticipated to be utilized in a variety of magnet applications. To further increase the critical current density Jc of these materials to levels needed for commercial applications, this study employs reel to reel (RTR) pulsed laser deposition (PLD) to fabricate REBCO+BaHfO3 (BHO) CCs. PLD creates BHO nanorods, which serve as flux-pinning defects. The material is subjected to O2+ irradiation to introduce more defects. The irradiation-induced defects serve as flux-pinning centers to the REBCO+BHO-nanorod CCs, increasing Jc along the c axis and over a wide range of magnetic-field angles compared with conventional REBCO+BHO-nanorod CCs. Both nanorods and irradiation-induced defects are demonstrated to be effective pinning centers in this material.
  • Kohei Higashikawa, Naohiro Numata, Kohei Hisajima, Takumi Suzuki, Takanobu Kiss
    IEEE Transactions on Applied Superconductivity 30(4) 2020年6月  査読有り
    © 2002-2011 IEEE. It has been recognized as a significant issue that the magnetization of RE-123 coated conductors affects the spatial homogeneity and the time variation of the magnetic field of the magnets for MRI, NMR, and accelerators. Therefore, the understanding and the modelling of the magnetization of a coated conductor are crucial for the quantitative estimation and the compensation of its influence on a magnet. On the other hand, the magnetization of the coated conductor has been usually measured and analyzed as a global value; then it is difficult to clarify the local electromagnetic behavior governing such a global performance. Furthermore, such behavior should be investigated under the condition not only with external magnetic field but also with DC transport current as is exposed in a magnet. In this study, the magnetization of a coated conductor was characterized by a spatially-resolved measurement based on the scanning Hall-probe microscopy (SHPM). The magnitude and the time variation of the magnetization were clarified from the visualized magnetization current distribution and its time variation. In particular, they were modeled successfully including the influence of the transport current. Furthermore, taking account of the findings, the experimental results were successfully reconstructed by a numerical analysis based on finite element method (FEM). This will contribute to the quantitative estimation and the compensation of the magnetization problem for the magnets comprising RE-123 coated conductors.
  • Takumi Suzuki, Syunsuke Oomura, Kazutaka Imamura, Masayoshi Inoue, Kohei Higashikawa, Satoshi Awaji, Koichi Nakaoka, Teruo Izumi, Takanobu Kiss
    IEEE Transactions on Applied Superconductivity 28(3) 2018年4月1日  査読有り
    We have investigated the in-field critical current properties in BaZrO3-added (Y, Gd) Ba2Cu 3O7-δ (YGdBCO)-coated conductor fabricated by using a multi-coating trifluoroacetates metal-organic deposition (MOD) method. We compared these properties with EuBCO-coated conductor fabricated by the pulsed laser deposition (PLD) method. The sample using the 30-nm once-coat-layer-thickness donce shows superior in-field Jc down to 4.2 K than that of the previous standard coating using 170-nm-thick layer for each coating. From the analysis of E-J characteristics, an analytical expression for Jc as a function T and B has been derived. It was confirmed that the high Jc region in sample with donce = 30 nm is widely spread in high-temperature and high-magnetic-field region. By comparison with the Jc properties of the BaHfO3 -added PLD CCs, the minimum Jc, which is estimated from magnetic field angle dependence, shows even higher value up to 5 T of magnetic field at 65 K and up to 3 T at 77 K. From these results, the new MOD-YGdBCO process using the thin once-coat-layer-thickness is very promising for the practically important mid field region such as 3 to 5 T.
  • Kohei Higashikawa, Takumi Suzuki, Masayoshi Inoue, Shinji Fujita, Yasuhiro Iijima, Takanobu Kiss
    IEEE Transactions on Applied Superconductivity 28(3) 2018年4月1日  査読有り
    We investigated the relationship between current capacity and local critical current distribution of a Cu-sheathed multifilamentary RE-123 coated conductor (CC). Patterning multifilamentary structure on CC will be a promising solution for reducing magnetization to assure spatial homogeneity and its temporal stability of magnet applications such as MRI and NMR. On the other hand, it will become more difficult to maintain the current capacity because a smaller defect can block the current flow in a narrower filament. Permitting electrical coupling among the filaments will work for maintaining current capacity because current can avoid such a defect by flowing into the adjacent filament. However, too small interfilamentary resistance will result in long time constant of filament coupling, which will affect spatial homogeneity and its temporal stability of magnet applications. Therefore, to design a multifilamentary CC satisfying the requirement from magnet applications, it is necessary to understand the quantitative impact of interfilamentary resistance of the multifilamentary CC on its current capacity under the influence of spatial variation of local critical currents. In this study, we estimated global critical current of a Cu-sheathed multifilamentary CC as a function of interfilamentary resistance by considering its local critical current distribution in each filament. As a result, it was confirmed that the electrical coupling among the filaments was very effective to improve the current capacity of such a multifilamentary CC especially for a section with spatially inhomogeneous local critical currents. Furthermore, it was also found that local heat generation could be significantly suppressed even for a section with relatively homogeneous local critical currents.
  • Takanobu Kiss, Masayoshi Inoue, Kohei Higashikawa, Takumi Suzuki, Lin Lyu, Ken Takasaki, Kazutaka Imamura, Yuta Onodera, Dai Uetsuhara, Akira Ibi, Teruo Izumi, Hitoshi Kitaguchi
    CRYOGENICS 80 221-228 2016年12月  査読有り
    We have investigated flux flow dissipation in typical two kinds of HTS tapes, i.e., a Bi-2223 multi-filamentary tape and a RE-123 coated conductor (CC) from the view point of heat load under over current conditions. Based on systematic measurements on current-voltage characteristics, the nonlinear flux flow dissipation has been described analytically by taking into account current sharing in metallic sheath or stabilization layer. Flux flow dissipation in the RE-123 CC shows much steeper temperature dependence than that of the Bi-2223 tape. As a result, attainable cooling power becomes smaller in the RE-123 CC in comparison with that of Bi-2223 tape even if the same cooling condition. In other word, acceptable temperature rise in the RE-123 CC is small at over current condition, whereas moderate temperature dependence in the Bi-2223 tape allows stable operation even if the bias current exceeds the critical current. Influence of spatial inhomogeneity in the both HTS tapes has also been investigated. Longitudinal variation of local critical current, I-c, and its statistical behavior have been characterized by use of reel-to-reel scanning Hall probe microscopy. It has been found that the flux flow dissipation is possibly localized more than one order higher than that of the average value due to discrete local I-c drops. (C) 2016 Published by Elsevier Ltd.

MISC

 69

共同研究・競争的資金等の研究課題

 4