SLIMプロジェクトチーム

小川 博之

オガワ ヒロユキ  (Hiroyuki Ogawa)

基本情報

所属
国立研究開発法人宇宙航空研究開発機構 宇宙科学研究所 教授
学位
博士(工学)(1996年3月 名古屋大学)

連絡先
ogawa.hiroyukijaxa.jp
J-GLOBAL ID
200901051344540154
researchmap会員ID
1000253790

外部リンク

将来の科学衛星に向けた先進的熱制御システムの研究
 科学衛星プロジェクトの経験を基に,現状の課題と将来計画を分析し,将来の科学衛星に必要な先進的熱制御システムの研究開発をおこなっています.研究成果はX線天文衛星ひとみに搭載された熱制御システムにフィードバックされている他,次期科学衛星計画への適用が検討されている等,科学衛星の可能性を広げ,世界一流の成果を創出する活動に貢献しています.

科学衛星プロジェクトの熱制御
 日欧水星探査計画BepiColombo等のこれまで経験のない極限環境に晒される探査機や,X線大型望遠鏡衛星ひとみ等の熱流体デバイスを積極的に採用した挑戦的プロジェクトにおいては,従来の衛星開発手法やその延長線上では対応できず,これまで経験のない新しい衛星開発手法が求められます.極限環境に耐える新規材料開発や熱設計・解析手法の構築,試験設備整備や検証手法の開発など,新しい研究開発を熱流体力学の学術的知見をもって先導し,熱の観点でプロジェクトの成功に貢献しています.

熱流体力学の応用
 熱流体とその周辺の学術的知見を基に,さまざまな宇宙科学プロジェクト活動に貢献しています.再使用ロケットの研究では,エンジン流れや極低温タンク,外部流等熱流体にかかわる課題解決に貢献しています.衛星推進系ではヒドラジンスラスタ内部化学反応流の研究によりスラスタ解析技術の向上に貢献し,ロケット推進系では固体ロケット内部流解析手法を開発し,M-VロケットやSRB-Aの不具合原因究明に貢献しました.その他,ロケットの飛行安全やロケット排気プルームの電波干渉問題等に関わり,ロケット研究に貢献しています.また高速電磁流体中の衝撃波干渉の理論研究や電磁流体を利用した推進システムの研究をおこないました.


受賞

 1

論文

 95
  • Yuki Akizuki, Kimihide Odagiri, Kenichiro Sawada, Hiroshi Yoshizaki, Masahiko Sairaiji, Hiroyuki Ogawa
    Applied Thermal Engineering 264 2025年4月1日  
    A loop heat pipe is a two-phase fluid loop driven by capillary force. Fabrication of a loop heat pipe evaporator by additive manufacturing has been investigated as a low-cost, quick-delivery method for producing a high-performance loop heat pipe. This study investigated the evaporation and heat transfer performance of a wick-integrated evaporator fabricated by additive manufacturing. It is essential to understand the thermal characteristics of the evaporator for a loop heat pipe with an additive-manufactured evaporator for all applications. A tested loop heat pipe with an additive-manufactured evaporator achieved a maximum heat transport capability of 120 W (heat flux: 7.96 W/cm2) and a minimum thermal resistance of 0.321 °C/W in the horizontal orientation at a 20 °C sink temperature. The evaporative heat transfer coefficient and heat leak ratio to the reservoir were calculated for each orientation test result. The maximum evaporative heat transfer coefficient was 50 kW/m2/K and the heat leak ratio was less than 10 % between 10 W and 70 W in the horizontal orientation. These results reveal that the increase in heat leakage to the reservoir due to the decrease in the evaporative heat transfer coefficient leads to the increase in the loop heat pipe operating temperature and thermal resistance. The novelty of this study is that it clarifies the relationship between a loop heat pipe's thermal resistance and evaporator thermal performance by correlating the evaporative heat transfer coefficient and the heat leakage of the wick-integrated evaporator, which uses additive manufacturing, based on the heat transport test results in each orientation.
  • Masaru Hirata, Yuki Akizuki, Kimihide Odagiri, Hiroyuki Ogawa
    International Journal of Thermal Sciences 207 2025年1月  
    A cryogenic capillary pumped loop (CCPL) is a highly efficient two-phase capillary-force-driven heat transport device that operates at cryogenic temperatures. CCPL satisfies the demands for space applications in cryogenic regions as it can transport heat over long distances without mechanical moving parts. In this study, the transient internal flow during the supercritical startup of CCPL was predicted, and various temperature relationships were used to determine whether CCPL starts up or not. The utilized CCPL comprised a wick (pore radius = 1.0 μm), exhibited a heat transport distance of 2 m, and was filled with nitrogen as the working fluid. The supercritical startup experiments were performed at a temperature range of 77–300 K; the startup procedure was initiated when the maximum temperature of CCPL decreased to ∼150 K. Three different liquid supply cycles were tested during the supercritical startup, and the startup time was reduced (a maximum and minimum of 4.1 and 1.9 h, respectively). CCPL started when the evaporator temperature was below the cold reservoir temperature. Thus, the temperature relationship between the cold reservoir and evaporator at the time of applying the heat load to the evaporator could be used to determine the possibility of starting CCPL. The startup was considered successful when the cold reservoir temperature was higher than the evaporator temperature, as the cold reservoir, which exhibited a two-phase state, supplied sufficient liquid to the evaporator, filling the inside of the evaporator with liquid.
  • Takeshi Yokouchi, Xinyu Chang, Kimihide Odagiri, Hiroyuki Ogawa, Hosei Nagano, Hiroki Nagai
    International Journal of Heat and Mass Transfer 231 2024年10月  
    This paper investigated the effect of filling pressure on the operating characteristics of a gravity-assisted cryogenic loop heat pipe(CLHP) for use in gravity environments such as terrestrial and lunar environments. The CLHP wick is made of sintered stainless-steel fibers with a pore radius of 1.56 μm and designed with a heat transport distance of 2.05 m. The experiments were conducted under gravity-assisted conditions (the condenser was placed 0.1 m higher than the evaporator). Notably, the filling pressure originated from the assumed vapor-liquid distribution in the CLHP under steady-state conditions. The filling pressure was varied from 2.9 MPa to 3.4 MPa in 0.1 MPa increments for six different conditions. Specifically, (1) 2.9 MPa and (2) 3.0 MPa are conditions where the heat leakage due to the vapor phase in the evaporator core is large, while (3) 3.1 MPa and (4) 3.2 MPa are conditions where there is no vapor phase in the evaporator core and the surplus vapor phase escapes to the CC. In general, this condition is considered to be the optimum amount of working fluid for room-temperature LHPs when designing. (5) 3.3 MPa and (6) 3.4 MPa are overfilling conditions that cause the CC to be filled with liquid. The results revealed that the higher the filling pressure, the more obvious the variation in operating temperature caused by the transition of drive modes. The maximum heat transfer capability reached 25 W in cases (1)-(4). In cases (5) and (6), the heat transfer capabilities increased to 30 W, although the operating temperature was higher. Furthermore, the hysteresis effect under different filling pressure conditions was newly confirmed. The power cycling experiments demonstrated that hysteresis in the operating temperature occurred at high heat loads and showed a similar trend to the room-temperature LHP.
  • Hideyuki FUKE, Shun OKAZAKI, Akiko KAWACHI, Manami KONDO, Masayoshi KOZAI, Hiroyuki OGAWA, Masaru SAIJO, Kakeru TOKUNAGA
    Journal of Evolving Space Activities 2 156 2024年7月25日  査読有り
  • Kimihide Odagiri, Xinyu Chang, Hiroki Nagai, Hiroyuki Ogawa
    Applied Thermal Engineering 255 123878-123878 2024年7月  
    One of the main advantages of a cryogenic loop heat pipe (CLHP) is its heat transfer capability over long distances and operability under anti-gravity conditions. However, there are only a few studies on the thermal characteristics of long-distance CLHPs. It is essential to investigate the effect of a hydraulic head on CLHP performance to enhance the utilization of CLHPs in various applications. This study investigated the thermofluidic behaviors of a 2-m nitrogen CLHP with a capillary starter pump (CSP) under horizontal and anti-gravity conditions where the evaporator was 350 mm higher than the condenser. The novelty of the study is to reveal the heat transfer characteristics and operating mechanisms under anti-gravity conditions based on comparisons with experimental results under horizontal conditions. In the CLHP, a fine stainless-steel porous wick with a pore radius of 1.0 μm and permeability of 1.3 × 10−13 m2 was used for an evaporator and the CSP. The lengths of the vapor line, condenser, and liquid line were 2000, 1500, and 2000 mm, respectively. When a heat load of 4 W was applied to the CSP and evaporator, the CLHP successfully started with an initial cooling condition called a supercritical startup under anti-gravity conditions. The startup temperature behaviors were compared under horizontal and anti-gravity conditions. The thermal resistance of the CLHP with a stepped-up evaporator heat load and various CSP heat loads was evaluated for two CLHP orientations. The CLHP stably operated under evaporator heat loads of 4–24 W (horizontal) and 4–20 W (anti-gravity) for three CSP heat loads of 0, 2, and 4 W. The effect of the CLHP orientation on the thermal resistance with various CSP heat loads is discussed. This study enhances the applicability of the long-distance CLHP to various applications with a high degree of postural freedom by revealing the operating mechanism and thermal characteristics of the long-distance CLHP under anti-gravity and horizontal conditions.

MISC

 381

書籍等出版物

 1

講演・口頭発表等

 33

共同研究・競争的資金等の研究課題

 10

産業財産権

 6

学術貢献活動

 1

● 指導学生等の数

 6
  • 年度
    2018年度(FY2018)
    博士課程学生数
    1
  • 年度
    2019年度(FY2019)
    博士課程学生数
    2
    修士課程学生数
    1
    学術特別研究員数
    1
  • 年度
    2020年度(FY2020)
    博士課程学生数
    1
    修士課程学生数
    1
    学術特別研究員数
    1
  • 年度
    2018年度(FY2018)
    博士課程学生数
    1
  • 年度
    2019年度(FY2019)
    博士課程学生数
    2
    修士課程学生数
    1
    学術特別研究員数
    1
  • 年度
    2020年度(FY2020)
    博士課程学生数
    1
    修士課程学生数
    1
    学術特別研究員数
    1

● 専任大学名

 2
  • 専任大学名
    東京大学(University of Tokyo)
  • 専任大学名
    東京大学(University of Tokyo)

● 所属する所内委員会

 6
  • 所内委員会名
    研究所会議
  • 所内委員会名
    プログラム会議
  • 所内委員会名
    信頼性品質会議
  • 所内委員会名
    環境・安全管理統括委員会
  • 所内委員会名
    ISASニュース編集小委員会
  • 所内委員会名
    宇宙科学プログラム技術委員会