基本情報
- 所属
- 国立研究開発法人宇宙航空研究開発機構 宇宙科学研究所 宇宙機応用工学研究系 特任教授
- 学位
- 学術博士(University of California, Los Angels(アメリカ合衆国))
- J-GLOBAL ID
- 200901092149206485
- researchmap会員ID
- 1000168389
- 外部リンク
研究キーワード
12研究分野
6経歴
12-
2019年4月 - 現在
-
2008年10月
-
2006年6月
-
2004年10月
学歴
5-
- 1981年3月
-
- 1979年3月
-
- 1979年
委員歴
5受賞
6-
2012年10月
-
2005年3月
論文
98-
Asia-Pacific Microwave Conference Proceedings, APMC 542-545 2023年This paper presents the fabrication of an Active Integrated Phased Array Antennas (AIPAA) sensor system prototype utilizing Information, Communication & Energy transfer (ICEt) technology. Through the high-density integration of hardware components and software algorithms, this system enables adaptive adjustments in diverse scenarios, leading to optimal system performance. The proposed prototype demonstrates the capability to fulfill sensing, communication, and energy transfer tasks in various environments, including spacecraft exploration and river disaster warning systems. This research represents a significant step towards the development of advanced wireless sensor networks with ICEt technology for multifunctional applications.
-
SN Applied Sciences 2(12) 2020年12月1日We report on the irreversible and reversible resistance changes for γ-ray irradiation in amorphous GeTe thin films with Ag electrodes. The γ-ray irradiation at a dose of 1 kGy irreversibly decreased the DC resistance by two orders of magnitude. The irreversible resistance change was caused by the formation of a conductive region that consisted of Ag-Te compounds. In-situ real-time DC resistance and AC impedance measurements revealed reversible variations in several electrode structures with DC resistances ranging widely from about 10 kΩ to about 5 MΩ. The DC resistance decreased by 2–5% with a time constant of about 3–7 min following the γ-ray irradiation with a dose rate of 0.5–2 kGy/h, and recovered on interruption. The AC impedance measurement was analyzed with a simple equivalent circuit consisting of a parallel RC circuit of the Ag-diffused GeTe matrix, connected serially to the interface resistance. The interface resistance and the capacitance of the matrix exhibited a fast reversible variation, which is explained by trapping and detrapping of carriers in the charged defects formed by the Ag re-diffusion. The resistance of the matrix showed a slow reversible variation with a time constant of 7 min, similar to the DC resistance. The slow reversible variation is attributed to the growth and dissolution of the conductive region caused by the Ag re-diffusion.
-
IEEE Microwave and Wireless Components Letters 30(10) 997-1000 2020年10月© 2020 IEEE. In this letter, a frequency-tunable rectifier in the $C$-band designed by a hybrid semiconductor integrated circuit (HySIC) concept is proposed. A GaAs monolithic microwave integrated circuit (MMIC) and a Si radio frequency integrated circuit (RFIC) were utilized as the HySIC configuration in the rectifier design. For the purpose of initial confirmation of this design validity, the GaAs and Si chips were fabricated and packaged onto the copper tungsten plate with gold plating. As measured results, frequency-tunable range from 3.82 to 4.55 GHz was measured. Maximum radio frequency (RF)-direct current (dc) conversion efficiency and output dc power in the measured power range from-10.0 to 17.8 dBm were 28.7% and 17.3 mW, respectively.
-
IEEE MTT-S International Microwave Symposium Digest 2020-August 1180-1183 2020年8月© 2020 IEEE. The 24 GHz communication system was demonstrated with wireless multi-sensors by wirelessly powering at 5.8 GHz. The wireless sensors for health monitoring in a space vehicle work as the sensors of temperature, humidity, acceleration, illuminance, battery voltage and sound in this study. Under output power of 30W from a GaN transmitter, a GaAs rectifier of energy harvester was operated with more than 80% RF-DC conversion efficiency.
MISC
494-
Journal of Advanced Science 12(1/2) 26-27 2000年In this paper, as one of the examples of an application of an active integrated antenna technique, a design method and experimental data of the active integrated amplifier antenna array were reported for microwave power transmission in the space solar power satellite 2000 system. The stacked structure of a unit cell in the array proposed here consists of three layers: the amplification circuit layer, radiation layer, and coupling layer. By incorporating 2×2 unit cells with the combination of a directional coupler and an FET amplifier, a light unit patch plate with weight of 200g.
-
Journal of Advanced Science 12(1/2) 24-25 2000年Millimeter wave frequencies are expected to be important for the high speed and large volume communication system in the multi-media society. Demands of light-weight, multi-functions are very high for such a system. The active integrated antenna is one of techniques to solve these problems. In this report, for use in the Intelligent Transport System (ITS), a 5.8GHz 2×2 active integrated antenna array fabricated on a soft substrate with a package-type FET and a K-band 2-element active integrated antenna array fabricated on a ceramic substrate with a MMIC oscillator were demonstrated. From the experimental results, it is believed that fundamental data for the new communication system were obtained.
-
SASインテリジェント・シンポジウム 12(1/2) 26-27 2000年In this paper, as one of the examples of an application of an active integrated antenna technique, a design method and experimental data of the active integrated amplifier antenna array were reported for microwave power transmission in the space solar power satellite 2000 system. The stacked structure of a unit cell in the array proposed here consists of three layers: the amplification circuit layer, radiation layer, and coupling layer. By incorporating 2×2 unit cells with the combination of a directional coupler and an FET amplifier, a light unit patch plate with weight of 200g.
-
SASインテリジェント・シンポジウム 12(1/2) 24-25 2000年Millimeter wave frequencies are expected to be important for the high speed and large volume communication system in the multi-media society. Demands of light-weight, multi-functions are very high for such a system. The active integrated antenna is one of techniques to solve these problems. In this report, for use in the Intelligent Transport System (ITS), a 5.8GHz 2×2 active integrated antenna array fabricated on a soft substrate with a package-type FET and a K-band 2-element active integrated antenna array fabricated on a ceramic substrate with a MMIC oscillator were demonstrated. From the experimental results, it is believed that fundamental data for the new communication system were obtained.
-
MWE'00 Microwave Workshop Dig, WS11-2 275 2000年
-
2000 Asia-Pacific Microwave Conf 1 1506 2000年
-
電子情報通信学会技術研究報告. EMCJ, 環境電磁工学 100(364) 25-30 2000年本報告では、MMIC発振器への光照射による周波数シフトについて実測及びシミュレータによる検証を行ったのでそれらについて報告する。発振器のゲートバイアスが浅い状態でのMMIC発振器への光照射では、発振周波数は高周波側にシフトした。また、マイクロ波回路シミュレーターを用いて、等価回路モデルの容量成分を変化させ、ハーモニックバランス解析を行った。容量成分cgdの増加が高周波側へのシフトに関係している計算結果を得た。
-
Korea-Japan Microwave Workshop(KJMW-2000) 53 2000年
-
Korea-Japan Microwave Workshop(KJMW-2000) 17 2000年
-
Journal of advanced science 12(1/2) 26-27 2000年In this paper, as one of the examples of an application of an active integrated antenna technique, a design method and experimental data of the active integrated amplifier antenna array were reported for microwave power transmission in the space solar power satellite 2000 system. The stacked structure of a unit cell in the array proposed here consists of three layers: the amplification circuit layer, radiation layer, and coupling layer. By incorporating 2×2 unit cells with the combination of a directional coupler and an FET amplifier, a light unit patch plate with weight of 200g.
-
Journal of advanced science 12(1&2) 24-25 2000年Millimeter wave frequencies are expected to be important for the high speed and large volume communication system in the multi-media society. Demands of light-weight, multi-functions are very high for such a system. The active integrated antenna is one of techniques to solve these problems. In this report, for use in the Intelligent Transport System (ITS), a 5.8GHz 2×2 active integrated antenna array fabricated on a soft substrate with a package-type FET and a K-band 2-element active integrated antenna array fabricated on a ceramic substrate with a MMIC oscillator were demonstrated. From the experimental results, it is believed that fundamental data for the new communication system were obtained.
-
The 3rd Japan-France Seminar on Intelligent Materials and Structures Dig. 202 2000年
-
The 3rd Japan-France Seminar on Intelligent Materials and Structures Dig. 200 2000年
-
Journal of advanced science 12(1/2) 26-27 2000年In this paper, as one of the examples of an application of an active integrated antenna technique, a design method and experimental data of the active integrated amplifier antenna array were reported for microwave power transmission in the space solar power satellite 2000 system. The stacked structure of a unit cell in the array proposed here consists of three layers: the amplification circuit layer, radiation layer, and coupling layer. By incorporating 2×2 unit cells with the combination of a directional coupler and an FET amplifier, a light unit patch plate with weight of 200g.
-
Journal of advanced science 12(1/2) 24-25 2000年Millimeter wave frequencies are expected to be important for the high speed and large volume communication system in the multi-media society. Demands of light-weight, multi-functions are very high for such a system. The active integrated antenna is one of techniques to solve these problems. In this report, for use in the Intelligent Transport System (ITS), a 5.8GHz 2×2 active integrated antenna array fabricated on a soft substrate with a package-type FET and a K-band 2-element active integrated antenna array fabricated on a ceramic substrate with a MMIC oscillator were demonstrated. From the experimental results, it is believed that fundamental data for the new communication system were obtained.
-
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES 47(9) 1901-1909 1999年9月In this paper, as one of the examples of an application of an active integrated antenna technique, a design method and experimental data of the active integrated amplifier antenna array were reported for microwave power transmission in the Space Solar Power Satellite 2000 system. The stacked structure of a unit cell in the array proposed here consists of three layers: the amplification circuit layer, radiation layer, and coupling layer. By incorporating 2 x 2 unit cells with the combination of a directional coupler and an PET amplifier, a light unit patch plate with weight of 200 g and 25.6 dBm as effective radiated power was fabricated and operated at 2.45 GHz.
書籍等出版物
5講演・口頭発表等
7-
KMITL_Kagoshima U joint seminar - Space Electronics Technologies and Applications 2016年10月22日
所属学協会
6Works(作品等)
1共同研究・競争的資金等の研究課題
8-
日本学術振興会 科学研究費助成事業 2011年4月 - 2015年3月
-
日本学術振興会 科学研究費助成事業 2009年 - 2012年