坂本 勇樹

At the European Spallation Source (ESS) ERIC, the liquid hydrogen moderator development is undertaken for its predominantly high parahydrogen fraction, which helps to attain a higher neutron intensity at a very high brightness. The Cryogenic Moderator System (CMS) is equipped with a catalyst to convert hydrogen from the ortho to the parastate to keep desirably high parahydrogen fractions of more than 99.5% in the cold moderators, which is required to deliver high brightness cold neutron beams to the neutron instruments. An in-situ measurement system for the ortho and para fractions of liquid hydrogen (OPMS) has been developed using a Raman spectroscopy to detect any undesirable shift towards a high orthohydrogen fraction caused by neutron scattering driven para-to-ortho back conversion. A Raman optics system was installed into a mock-up OPMS vacuum chamber and its performance evaluation tests have been conducted by flowing liquid hydrogen. It was verified that the developed Raman optics system succeeded in measuring the parahydrogen fraction with an accuracy of 0.1%, which met the requirement.

The Institute of Space and Astronautical Science (ISAS) of the Japan Aerospace Exploration Agency (JAXA) conducts a deep space exploration mission named Demonstration and Experiment of Space Technology for INterplanetary voYage with Phaethon fLyby and dUst Science (DESTINY⁺). The mission requires a high-performance, compact solid kick stage with a high mass ratio and high system safety. The kick stage employes a newly developed laser ignition system to meet these requirements. We designed a laser unit for upper stages (LUUS), two types of laser-initiated pyrotechnic devices for solid motor ignition and a separation device actuator (the LID and LCTG) for the kick stage system. Optical fiber paths connecting the LUUS to LID/LCTG enables a continuity check by optical frequency domain reflectometry (OFDR). We successfully conducted continuity checks with OFDR and ran laser ignition tests to validate the design in simulating assembly- and launchsite operations.