Research, Test and Operation Technology Grp.

Ken Goto

  (後藤 健)

Profile Information

Affiliation
Professor, Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency
Degree
(BLANK)

J-GLOBAL ID
200901053594749329
researchmap Member ID
1000227989

Papers

 52
  • Tran Huu Nam, Ken Goto, Yuta Tobata, Yuki Kubota, Masahito Ueda, Satoshi Kobayashi
    Journal of Composite Materials, 57(5) 929-940, Mar, 2023  Peer-reviewed
  • Yuta Tobata, Shinsuke Takeuchi, Ken Goto
    Journal of the European Ceramic Society, 41(16) 113-122, Dec 1, 2021  
    Stress–strain relations at different degrees of peak stress were investigated using loading–unloading tests to elucidate cumulative damage mechanisms of short fiber type C/SiC under tension. Damage observations revealed their crack length, number, and angle characteristics. Furthermore, stress–strain relations were estimated by expanding Basista's equations and by substituting measured damage characteristics into them, which revealed a nonlinear stress–strain relation. Cracks propagated in transverse fiber bundles without fiber fracture, connecting other cracks that had 75 ° – 90 ° orientation to the tensile axis. Stress–strain relations estimated qualitatively and quantitatively suggest that mixed mode I and mode II crack opening in transverse fiber bundles in the through-thickness plane caused the stress–strain nonlinear relations.
  • Yuta Tobata, Shinsuke Takeuchi, Ken Goto
    Journal of Composites Science, 5(9), Sep 1, 2021  
    A cumulative damage mechanism for short fiber type C/SiC during shear loading– unloading testing was examined and quantified using Iosipescu specimens parallel in the in-plane and through-thickness plane, and by using modified fracture and damage mechanics theory referring to measured damage characteristics (crack length, number and angle). A nonlinear stress–strain relation was found for both specimens. Decrease in the apparent modulus was confirmed with increased peak stress, although permanent strain increased. Inelastic strain of the decomposed tensile direction derived from shear stress was greater than that of the compressive one. Cracks propa-gated perpendicularly to the tensile direction, intruding on the boundary of the transverse fibers and connecting to other cracks. The theoretical damage mechanics model succeeded to predict the stress–strain relation, proposing that the shear mechanical properties are predictable by measuring the damage characteristics.
  • Yuta Tobata, Shinsuke Takeuchi, Ken Goto
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 41(1) 185-193, Jan, 2021  
    This study investigated cumulative damage mechanisms of short fiber type C/SiC under compression. To measure mechanical properties (unloading modulus and permanent strain) before fracture, repeated loading-unloading tests were conducted using a strain gage. Damage was observed to assess characteristics of crack density, length, number, and propagation angle. Furthermore, relations between mechanical properties and damage characteristics were elucidated by application of Basista's equations and by substituting crack densities inferred from damage observations. Stress-strain relations revealed nonlinear behavior. The unloading modulus did not change, but the permanent strain increased. Cracks propagated mainly between fibers, without fiber fracture, connecting other cracks in the direction of orientation 0 deg to 30 deg to the compressive axis. We estimated permanent strain using Basista's equations and damage characteristics. Estimates roughly agreed with experiment results, suggesting that the permanent strain increase is attributable to closed crack sliding and friction caused by increased crack density.
  • Takao Nakagawa, Ken Goto, Hidehiro Kaneda, Hideo Matsuhara, Jun Matsumoto, Tadahito Mizutani, Hiroyuki Ogawa, Masaru Saijo, Yoichi Sato, Kenichiro Sawada, Hiroshi Shibai, Keisuke Shinozaki, Hiroyuki Sugita, Shinsuke Takeuchi, Chihiro Tokoku, Thierry Tirolien, Hideki Uchida
    Proceedings of SPIE - The International Society for Optical Engineering, 11443, 2020  
    We present an overview of the cryogenic system of the next-generation infrared observatory mission SPICA. One of the most critical requirements for the SPICA mission is to cool the whole science equipment, including the 2.5 m telescope, to below 8 K to reduce the thermal background and enable unprecedented sensitivity in the mid- and far-infrared region. Another requirement is to cool focal plane instruments to achieve superior sensitivity. We adopt the combination of effective radiative cooling and mechanical cryocoolers to accomplish the thermal requirements for SPICA. The radiative cooling system, which consists of a series of radiative shields, is designed to accommodate the telescope in the vertical configuration. We present thermal model analysis results that comply with the requirements to cool the telescope and focal plane instruments.

Misc.

 65

Teaching Experience

 2

Research Projects

 22